Frequency Response:Main Output, no load

0.2 dB @ 10 Hz

3 dB @ 160 kHz

Noise:Measured at Main Output, unweighted, 22Hz-22kHz, Terminated 150 Ohms.

With gain at unity better than 100 dBu.

With gain at 66 dB better than 62 dBu

Equivalent Input Noise better than 128 dBu

High Pass Filters

Continuously variable swept frequency from 20 Hz to 250 Hz.

Slope:12 dB/Octave

Gain

Unity to +66dB in 6 dB steps, Trim continuously adjustable from 6dB to +6dB

Buss Output

Output is designed to feed a Buss-mix Amplifier (ie. Buss inputs on 5043) at the internal system level of -2.5 dBu

Maximum Output Level

Maximum output from 20 Hz to 40 kHz is +25 dBu

Mute

Mutes Main Output only

Total Harmonic Distortion and Noise

@ 1kHz, +20 dBu output:

Main Output:Better than 0.001%@ 20Hz, +20 dBu output:

Main Output:Better than 0.002%

Silk Engaged:Better than 0.2% Second harmonic

Equalization:

Low Shelving EQ

+/- 15dB boost or cut. Corner frequency 160Hz

High Shelving EQ

+/- 15dB boost or cut. Corner frequency 8kHz 16kHz switch selectable

Mid Peak EQ

+/- 15dB boost or cut. Continously variable frequency,

80 to 800Hz or 800Hz to 8000Hz switchable

Phantom Power

+48 Volts DC +/- 1%

Power requirements

Voltage range

9 to 18 Volts DC

Current consumption

@ 9VDC Current is 910 mA typical: Power = 11.7W

@ 12VDC Current is 670 mA typical: Power = 12.0 watts

@ 15VDC Current is 530 mA typical: Power = 12.0 watts

@ 18VDC Current is 450 mA typical: Power = 11.7 watts

Connector

5.5mm X 2.1mm DC jack, Center Positive

Current consumption

@ 9VDC = 1.0 A typical

@12VDC = 730 mA typical

@15VDC= 570 mA typical

@18VDC= 480 mA typical