Audio Inputs

16, balanced line-level, 1/4-inch TRS connector

Inputs

Tip: Audio +; Ring: Audio -; Sleeve: Ground

TRS Thru

Impedance matched output

Analog to Digital Conversion

48kHz sample rate, 24 bit

Frequency Response

4Hz-22kHz

A- Net In

One Category 5 (RJ45 connector)

Four-position slot range selector switch for use with Pro16e A-Net

A-Net Out

One Category 5 (RJ45 connector)

Gain Settings

Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu

Channel LED Indicators

Signal Present and Clip, per channel

Line Inputs

Impedance: 48k ohms

Metering

LEDs; green: Signal Present, red: Clip; per channel

Stereo Operation

Stereo Link, per channel pair;

Two-position switch (Normal, Link)

Maximum Input Level

+22dBu

Input Impedance

17.8k ohm

Freq. Response

4Hz-22kHz +0.2dB/-3dB

THD +N

< 0.003%

Crosstalk

-90dB

Signal to Noise (unweighted)

90dB typical, A/D to D/A

Measured from AN-16/i to AN-16/o Output Module

Digital Outputs

A-Net: 1; RJ45 connector

Pro16e A-Net

Use unshielded Cat-5e UTP (or better) cable

Latency

<0.880 msec (measured from analog input to analog output)

Power Supply Input Voltage Output Voltage Plug Size

External, DC, universal switching type

100-240 volts, 50/60Hz, 30VA

18-24 VDC, 0.5 amp

2 mm

Power

18-24 VDC, 500mA

Dimensions/Weight

482.6 x 146 mm ;1U high / 3.08 kg

Options

SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable